Sewage coming up through a floor drain or toilet is a health hazard, not just a mess to mop. Call Water Heater Repairer and a live dispatcher will route you to an independent, licensed and insured cleanup contractor who works in full protective gear.
Under IICRC S500 guidance, sewage is Category 3 water, which means it is treated as grossly contaminated from the start. The work has to be done in a set order, with the right protection, or the contamination just moves around the house.
We route only to licensed, insured independent contractors who wear respirators, disposable suits, nitrile gloves, and boots on every sewage job. Many in the network are IICRC-trained, so ask for credentials when they arrive.
Sewage soaks into drywall and wood fast, so active backups get top priority on the dispatch board. Arrival is often quick, depending on location and how many homes a storm surcharge hit at once.
Before anything gets cut or bagged, the contractor marks what has to go and puts a flat-rate quote in writing. The same document is useful for your insurance claim.
Expect EPA-registered disinfectants, HEPA vacuums, and air scrubbers built for contaminated jobs. If you want proof the area is clean, ask about ATP or swab testing at the end.
The usual cause is a blocked main line, whether from tree roots, grease buildup, or a broken stretch of clay or cast iron. Others come from the city side, when heavy rain overloads the municipal sewer and it surcharges back into basements. Either way, the cleanup is the same, but the fix to stop it happening again is not.
So we can line up a licensed plumber to run a camera through the line while the cleanup contractor works. Finding the cause now beats calling again after the next big storm.
Every sewage job follows the same rule: contain, remove, clean, disinfect, then dry.
When the main clogs, waste comes up the lowest fixture, usually a basement floor drain or shower. The contractor extracts the standing waste first, then begins controlled tear-out.
A toilet that kept running over can saturate the subfloor and stain the ceiling underneath. The contractor checks the underlayment and ceiling cavity with a moisture meter before deciding what to remove.
Carpet and pad that touched sewage are bagged and removed, with no exceptions. Drywall is flood-cut above the wet line, and soaked insulation inside the cavity is removed with it.
Hard surfaces are HEPA vacuumed, scrubbed, and treated with an EPA-registered disinfectant with proper dwell time. Negative air machines keep contaminated air from reaching the rest of the home.
A camera inspection through the cleanout shows whether roots, sags, or a broken section caused the backup. If the city line surcharges, a backwater prevention valve can block it from coming into the home.
After removal and disinfection, the framing and slab need to be fully dry before anything new goes in. Expect air movers, dehumidifiers, and daily moisture logs, with HEPA air scrubbers handling the smell.
A short process, run by contractors who see sewage calls constantly.
The dispatcher asks you to stop running water, keep children and pets out, and kill power to any wet circuits. We also ask which drain overflowed and whether units on a shared line are affected.
We route the call to a nearby licensed cleanup contractor carrying PPE, pumps, and plastic sheeting. If the line is still blocked, a plumber can be sent to clear it first.
The contractor maps how far the waste spread, takes moisture readings, and marks the line for flood cuts. You get a written flat-rate quote and photos before tear-out begins.
Once materials are out and surfaces are disinfected and dry, you get a walkthrough and the moisture logs. Ask about clearance testing and the contractor's own written workmanship warranty.
Bleach kills surface germs but does nothing for waste soaked inside drywall, carpet pad, or the bottom plate of a wall. A regular shop vac can aerosolize the contamination and spread it through the room. That lingering smell a week later is usually the sign something porous got left behind.
Shut off the taps, keep kids and pets clear, and call us now.
The floor drain gurgled during a heavy storm and then sewage poured out for an hour. The contractor showed up in full suits and respirators, pulled the carpet and the bottom two feet of drywall, and ran air scrubbers the whole time. They recommended a backwater valve, and a plumber installed one a week later.
With a small kid and a dog in the house, I was mostly worried about germs. They put up plastic containment, disinfected every surface, and did swab tests so I knew it was clean. Having actual results made it easy to let my son back in there.
The other half of our duplex shares the lateral, and their clog came up through my shower. A camera inspection showed tree roots packed into the clay section near the street. Getting both reports in writing made the conversation with my neighbor much easier.
The smell hit me the second I opened the basement door, and I honestly did not know who to call first. The dispatcher told me to stop running water, sent a plumber to clear the main, and had a cleanup contractor there that afternoon. My adjuster took the itemized scope and photos as-is, which saved a lot of back and forth.
If the spill is limited to one room, staying elsewhere in the home is usually fine once containment goes up. Anyone vulnerable, including kids, seniors, and people with health issues, should keep clear until the area is disinfected.
Not safely, since IICRC guidance treats carpet and pad hit by sewage as material that must be discarded. Hard items like tile, concrete, and sealed wood can usually be cleaned and disinfected instead.
Most often the main sewer line is blocked by roots, grease, or a cracked section. After heavy rain, it can also be the municipal sewer surcharging back up the lateral, which a camera inspection can help sort out.
A backwater valve lets waste leave the house but closes when sewage tries to flow back in from the street. It does not help with a blockage inside your own pipes, which is why the line still needs a camera check.
Coverage depends on the policy, and a lot of them only pay for backups if you bought a sewer backup rider. Check with your insurer, document everything with photos, and hold onto the written quote and moisture records.
Ask the contractor about clearance testing, such as ATP readings or surface swabs sent to a lab. You should also get moisture readings showing framing and subfloor are dry before anything is rebuilt.
We route calls to independent cleanup contractors working throughout Exeter and the surrounding suburbs. Coverage reaches zip codes like 18643.
Older neighborhoods in Exeter tend to have clay or cast iron sewer laterals, prime spots for roots and breaks. Homes on lower ground get hit harder when storm water overloads the city system. Tell the dispatcher your home's age and whether it has backed up before, and we route accordingly.
Basement drain overflows and finished lower-level cleanups.
Backups on shared lines in apartments, condos, and duplexes.
The same network reaches the suburbs around Exeter.
